SAMFLOR®-EP-3 / EP-5 is a durable chemical-resistant screed of approximately 3 / 5mm thick and three-part solvent-free combination of epoxy modified amine hardener filled with specially graded and selected high crushing strength fillers.

For rapid installation and strength gain.

SAMTILE-JME is a three-component epoxy grout used for gaps of 2 to 15mm on floors and walls with glass mosaic, ceramic tile, vitrified tile, marble and stone. It provides a lasting chemical and mechanical performance of high resistance coverings. Sealed membrane is hard-wearing, hygienic yet attractive with cosmetic finish. Available in various glittering and non-glittering shades.

SAMWAL-PL is a ready-to-use dry powder requiring only addition of water and produces a high strength mortar with non-shrinking properties. It is a mixture of specially processed cement and carefully graded fine aggregates. Additives impart high water retaining properties and adhesion to substrate. Low water / cement ratio ensures high early and ultimate strengths.    

Black ink is made using carbon black. And white pigments, such as titanium dioxide, are used either by themselves or to adjust characteristics of color inks. Inks also contain additives such as waxes, lubricants, surfactants, and dryin.

SAMCOAT®-EP is an Epoxy-base chemical-resistant coating product available in two liquid components as SAMCOAT®-EP Part 1 and SAMCOAT®-EP Part 2.

SAMSEAL® EP is an epoxy resin based chemical resistant versatile sealing product available in putty form as SAMSEAL® EP Part I and SAMSEAL® EP Part II.

SAMWAL-PL is a ready-to-use dry powder requiring only addition of water and produces a high strength mortar with non-shrinking properties. It is a mixture of specially processed cement and carefully graded fine aggregates. Additives impart high water retaining properties and adhesion to substrate. Low water / cement ratio ensures high early and ultimate strengths.